Why is my Timberwolf Chipper slow or not feeding?
- SStephanie RobinsonAug 2, 2025
If your Timberwolf Chipper is feeding slowly or not at all, several factors could be at play. First, ensure the engine speed is correct by inspecting the throttle and cable, and verifying the throttle is set to the specified speed. Check the hydraulic oil level and top it up if necessary. The infeed rollers may be jammed, so inspect and clear the infeed funnel, roller box, and rotor housing. Also, inspect the blades and anvils, rotating, sharpening, or replacing them if they are dull. Finally, make sure the discharge chute is clear of any obstructions.