Fingerscanner Technology for Time Attendance & Access Controller
3
Preamble
Respected users, sincerely thank you for choosing Time Tech
Fingerscanner Terminal for your time attendance or access controller
equipment. Please read the manual and understand the basic structure of the
product, performance, function and master installation, using and maintenance
and management of basic knowledge before using the product.
Time Tech terminals are using the ARM9 terminal hardware platforms,
with ATMEL processor which provide better stability and much higher working
speed. It adopts the Stand Alone working mode, which brings convenient in
every applications.
Several models are available with several different functions and looks,
but with similar major functions. Verification is implemented by using fingerprint,
and/or password, some models also equipped with internal RF card
verification methods, external wiegand communication.
Terminals use standard TCP network protocol, and support the U-disk
storage of data transmission, meet user in the network environment or without
network. Data transmission also possible to do via internet (using public IP),
that gives no border across cities or countries to do data transmission.
Design and construction are made by professionals, which put quality as
first priority without neglecting the attractive and elegant design. All machines
should have high performance, robust design and long live of usage for heavy
duty condition.
To Next Page
Loading...