Fingerscanner Technology for Time Attendance & Access Controller
15
! G. Mode is set “Yes”, machine will neglect the “Unlock Group” (Index 5.3.4)
setting to access door.
NB: The group in the user’s Lock Register (index 5.3.2 is not affected by G.
Mode setting “Yes”)
Example:
G. Mode is set “Yes”, Users is set “2”, machine will neglect the existing
“Unlock Group” setting, and will need 2 users for succeeding verification (in 10
seconds) to access door.
Note:
! After the first user is verified, the next user verification fails for 5 times, then
the first person verification is aborted (need to repeat again).
! After the first user is verified, if the next user does not do verification for 10
seconds, the first person verification is aborted (need to repeat again).
6. View Info
6.1 Reg. Data, to view the storage details
6.2 Records, to view user’s; admin’s record, and delete all records
6.3 Product, to view product’s info.
To Next Page
Loading...