1 2
1. General Information
These instructions should be read carefully
and retained for further reference and maintenance.
2. Safety
• Before installation or maintenance, ensure the
mains supply to the time controller is switched off
and the circuit supply fuses are removed or the
circuit breaker turned off.
• It is recommended that a qualified electrician is
consulted or used for the installation of this time
controller and install in accordance with the current
IEE wiring and Building Regulations.
• Check that the total load on the circuit including
when this time controller is fitted does not
exceed the rating of the circuit cable,
fuse or circuit breaker.
To Next Page
Loading...
