12
• Press the triangle hand button ‘ ’ to retrieve
the suspended ON time.
• Use the right arrow button ’→’ until you reach
the OFF time you wish to reinstate.
• Press the triangle hand button ‘
’ to retrieve
the suspended OFF time.
• Press the ‘TIME’ button to return to normal
operating mode.
7. Normal operating mode,
advancing & permanent
ON/OFF mode
• To ensure the unit is in normal operating mode to
run your ON/OFF programs, press the triangle hand
button ‘
’ until the left side of the display shows
AUTO and either ON (if the programme should
be ON now) or OFF (if the programme is due
to turn ON later).
• The TG77 will now run all programs stored
on a continuous basis.
• To advance or override the unit at any time,
press the triangle hand button ‘
’ twice.
• The display will change from ‘AUTO OFF’ to ‘AUTO
ON’ or from ‘AUTO ON’ to ‘AUTO OFF’.
To Next Page
Loading...
