Timex M921 User Manual

TIMEX
WATCH OPERATION GUIDE
TIMEX CONFIDENTIAL PROPRIETARY INFORMATION
Quality Control
Page 1 of 3
Model No(s):
M921
Part Name:
WATCH HEAD
Doc. No./Rev.:
20170119
Prepared by: GTajantajan Approved by:
Reviewed by: ACCabasan DGriffith
6o’clocksub‐dialshowsseconds.
10o’clocksub‐dialshows“minuteselapsed”forchronograph .
2o’clocksub‐dialshows“1/20secondselapsed”forchronograph .
Chronographsecondhandshows“secondselapsed”forchronograph.

1.0PURPOSE


1.1 ToprovideCustomerServiceCenterswithproceduresonhowtooperateandset‐uptheModel‐921watch.

2.0WATCHOPERATIONANDSET‐UP


2.1HOWTOSTARTYOURWATCH


Ifthewatchisprovidedwithane‐guard(smallplasticinsertedbetweencaseandcrown),itneedstoberemovedby
pullingdownward(perpendiculartothebackofthewatchcase).

2.2BASICWATCHOPERATION


a. PushtheCROWNintoZEROPositiontoactivatethewatchfornormaltimekeeping.
b. PresstheCROWNinwardtoactivateINDIGLOnight‐light.
c. PressandholdtheCROWNinwardforfoursecondstoactivateordeactivateNight‐Mode.

Note: WhenthewatchisinNight‐Mode,pressinganybuttonwillactivatetheINDIGLOnight‐lighttostayonfor3seconds.
 Night‐Modefeaturewillremainactivefor8‐hours.


Timex M921 Specifications

General

Brand	Timex
Model	M921
Category	Watch
Movement	Quartz
Clasp Type	Buckle
Type	Wristwatch
Features	Indiglo Light

Summary

Purpose

Watch Operation and Setup

How to Start Your Watch

Remove e-guard if present. Push CROWN to ZERO Position to activate for timekeeping. Press CROWN for INDIGLO. Hold CROWN for Night-Mode.

Basic Watch Operation

Activate watch by pushing CROWN to ZERO. Press CROWN for INDIGLO. Hold CROWN for Night-Mode activation/deactivation.

Date and Time Setting

Setting the date involves pulling CROWN to SET1 and rotating. Time setting uses SET2. Adjusting for new time zones uses SET1.

Chronograph Function

Details measurement capabilities (1/20s, seconds, minutes). Includes chronograph calibration procedure.

Standard Chronograph Measurement

Instructions for starting, stopping, resuming, and resetting the standard chronograph measurement using PB2 and PB4.

Split Time Measurement

Instructions for starting, splitting, resuming, stopping, and resetting the split time measurement using PB2 and PB4.