4
Operating the Alarm
1. Set the alarm time as indicated in Setting Alarm Time.
2. Set the Alarm Mode switch to “On.” A small dot will appear
in the lower left corner of the clock display, indicating that
the alarm has been set and will sound at the time selected.
Note: The alarm will play until it is shut off, or for a
maximum of two hours. As long as the Alarm Mode
switch is set to “On,” the alarm will sound at the set
time every 24 hours.
3. After the alarm sounds, press the Alarm Set/Reset button
to turn off the alarm while automatically resetting it for the
following day.
4. To turn off the alarm without automatically setting it for the
following day, set the Alarm Mode switch to “Off.”
Choosing an Alarm Volume
Choose a soft or extra alarm volume by setting the Alarm
Volume switch.
Operating the Snooze Feature
1. To operate the snooze feature, press the Snooze Bar after
the alarm sounds. The alarm will shut off for approximately
nine minutes before sounding again. You may repeat this
process several times during the two-hour snooze cycle.
To Next Page
Loading...
Need help?
General
