4
Display with Indicators
Setting The Time, The First Time
IMPORTANT: The first time you connect your Redi-Set clock radio to the AC outlet the internal computer will automatically
set the time correctly for the Eastern Time Zone, which is the initial default setting.
The display will begin a countdown sequence (5-4-3-2-1) then the correct year will flash twice, the correct Month/Date will
flash twice, and then the correct Eastern Time will be displayed. If you live in the Eastern Time Zone there is nothing else to
do. Your Redi-Set clock is set correctly and running.
If you do not live in the Eastern Time zone you must change the default zone display to your own zone. You only do this one
time and the Redi-Set internal computer will remember the new default zone setting and will always return to that setting after
a power interruption.
There are 7 time zones programmed into your Redi-Set clock radio.
ZONE 01 – Atlantic Time
ZONE 02 – Eastern Time (Default Setting)
ZONE 03 – Central Time
ZONE 04 – Mountain Time
ZONE 05 – Pacific Time
ZONE 06 – Alaskan Time
ZONE 07 – Hawaiian Time
To change the default time zone, depress the TIME ZONE button. The number “02” will appear
in the display indicating that the default zone is ZONE 02, Eastern Time.
Operating Instructions
Aux (Line In) Indicator
Day Indicators
Low Battery Indicator
AM Indicator
Alarm 1 Indicator
Time / Year / Month / Date and
Radio Frequency Display
Alarm 2 Indicator
KHz (AM) Frequency Indicator
MHz (FM) Frequency Indicator
To Next Page
Loading...
Need help?
General
