EasyManua.ls Logo

Tineco FLOOR ONE S2 Series - Dirty Water Tank; Filter & Floater

Tineco FLOOR ONE S2 Series
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
15
Dirty Water Tank
When dirty water reaches the Max line, the oater will block off the DWT and create a high pitched
sound indicating it’s time to switch off the appliance.
Pull up the tank lid to empty the DWT. Rinse the inside of the DWT and place back into the
appliance.
Filter & Floater
If the lter and the oater have been blocked, rinse with water.
Remove the lter from the tank lid, remove the oater, and rinse both parts with water.
Dry Filter
Grasp recessed area on each side of the lter and pull upward. Rinse under running water and must be
completely dry before recombining with the lid of the DWT.

Related product manuals