Tineco FLOOR ONE S2 Series User Manual

EN
16
Self-cleaning
1. Place the appliance on the storage tray and plug in.
Press the self-cleaning button and begin the process.
2. Once complete, the appliance will begin charging.
Clean the Dirty Water Tank after cleaning completed.
Note:
• Ensure the appliance is plugged in and the battery level
is >10%.
• Before self-cleaning cycle, please clean the DWT and
ensure the water level in the CWT exceeds 40%.
Brush Roller Cover
Grab the front handle while pressing the button
and pull upward to remove.
Rinse with water.
②
①
click
When replacing, always latch the brush cover into
place to avoid leakage.

Tineco FLOOR ONE S2 Series Specifications

General

Type	Cordless Wet/Dry Vacuum Cleaner
Runtime	Up to 35 minutes
Self-Cleaning	Yes
Battery Type	Lithium-Ion
Charging Time	4-5 hours
Dustbin Capacity	N/A (Wet/Dry Vacuum)
Smart Features	App connectivity