Tineco FLOOR ONE S3 Series User Manual

17
Dirty Water Tank
• When dirty water reaches the Max line, the appliance will stop working and show a reminder on the
display and play a voice prompt.
• Pull up the tank lid to empty the DWT. Use the 3-in-1 cleaning tool to remove remaining debris.
Rinse the inside of the DWT and place back into the appliance.
Filter & Floater
If the lter and the oater have been blocked, rinse with water.
Remove the lter from the tank lid, remove the oater, and rinse both parts with water.
HEPA Filter
Grasp recessed area on each side of the HEPA and pull upward. Rinse under running water and must
be completely dry before recombining with the lid of the DWT.
*A spare HEPA is provided with your appliance for convenient replacement.

Tineco FLOOR ONE S3 Series Specifications

General

Brand	Tineco
Model	FLOOR ONE S3 Series
Category	Vacuum Cleaner
Language	English