Name: Tineco FLOOR ONE S3 Series
Brand: Tineco
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Brush Roller Self-cleaning

AUTO MAX

1. Place the appliance on the charging base after use, the

sensor will auto-detect the level of dirt.

2. When you hear the voice prompt “please begin self-

cleaning cycle,” press the self-cleaning button and

begin the process.

3. Once complete, you will hear the voice prompt “self-

cleaning completed, please clean the Dirty Water

Tank.” At this point, the appliance will begin charging.

Note:

• Ensure the charging base is plugged in.

• Before self-cleaning cycle, please clean the DWT and

ensure the water level in the CWT exceeds 40%.

Brush Roller Cover

Grab the front handle while pressing the button

and pull upward to remove.

Rinse with water.

②

①

When replacing, always latch the brush cover into

place to avoid leakage.

click

Questions and Answers:

Need help?

Do you have a question about the Tineco FLOOR ONE S3 Series and is the answer not in the manual?

Tineco FLOOR ONE S3 Series Specifications

General