EN
10
Operation
Preparing for Use
Plug into the AC power outlet.
Tips:
• Please avoid entanglement of the power cord
in the process of releasing.
• The appliance can only be used under
120 voltage.
<142°
Press the button and the appliance will start
in Auto mode by default. Press it again to turn
off the appliance. Switch between Auto and
Steaming mode by pressing the button.
The appliance will stop working when put uprightly
and start running again when you recline.
* Do not recline more than 142° to protect
against water leakage.
After switching to the Steaming mode, the
number starts to read. After reaching 100, the
nozzle starts to spray steam.
Place the appliance on the storage tray
vertically after use for storage.
Note:
• Selecting the appropriate mode depending on the actual demand.
• Do not vacuum foamed liquid.
• To vacuum water left on the surface, the appliance will switch off in 3 seconds after power off.
• To avoid the power cord from being caught in the brush roller.
Stop Working Start Again
To Next Page
Loading...
Need help?
General
