Tineco iFloor User Manual

7
EN
Assembly
How to Assemble/Disassemble
Note:
For water tank and brush assembly, please refer to “Operation” and “Maintenance”.
To assemble the handle, insert it into the unit
base until you hear a click.
In case of product returning, please disassemble
the handle, rst remove the screw with
screwdriver, then press the spring located with
a tool to release the handle. Lift the released
handle from the unit.
Back
click

Tineco iFloor Specifications

General

Charging Input	100-240V
Voltage	22.2V 2500mAH Li-ion
Rated Power	120W
Running Time	22mins
Charging Time	3-4hrs
Water Flow Rate	Normal: about 40ml/min Spot: 220ml/min
CWT Capacity	17.92FL.OZ.(530ML)
DWT Capacity	13.53FL.OZ.(400ML)
Waterproof	IPX4