Tineco PURE ONE S11 Series User Manual

EN
12
The default setting on startup is AUTO. The
appliance then takes 3 seconds to initially
detect blockages or dust. If no dust is
detected, power is reduced to conserve energy.
When in MAX mode, press the AUTO/MAX
button to enter AUTO mode.
In AUTO mode, press the AUTO/MAX button
to enter MAX mode and the button lights up.
AUTO Mode
• In AUTO mode, the color of dust monitoring loop changes according to the amount of dust
detected. A red dust monitoring loop indicates more dust is detected whereas a blue loop
indicates less is detected. This mode automatically provides the best cleaning solution.
To enter AUTO mode:
① ②
Cleaning Mode Selection
MAX Mode

Tineco PURE ONE S11 Series Specifications

General

Model	PURE ONE S11 Series
Type	Cordless Stick Vacuum Cleaner
Battery Life	Up to 40 minutes
Battery Voltage	21.6V
Charge Time	3-4 hours
Dustbin Capacity	0.6 liters
Suction Power	130W
Filtration	HEPA
Smart Display	Yes
Multi-Surface Cleaning	Yes
Smart Features	iLoop Smart Sensor Technology
Accessories	Crevice Tool, Dusting Brush
Filtration System	4-stage fully sealed