Tineco PURE ONE S11 Series User Manual

EN
18
Note:
• Clean the dustbin and lters after each use.
• Use the cleaning tool to thoroughly clean the pre-lter when the indicator light shows a
blocked air channel. To maintain high performance, wash and dry the pre-lter monthly,
replacing it every 6 months.
Wash and dry the HEPA lter every 3 months, replacing it every 12 months.
Press the dustbin release button to remove
the dustbin.
Turn counter-clockwise to remove the
lters.
After cleaning, insert the clean pre-lter
into the mesh lter properly and it clicks
into place. Install the clean lter and
dustbin back into the main body, then
close the dustbin ap.
Warning:
• Do not wash the dustbin as it contains a dust
sensor. If it comes into contact with water,
please dry it with a hair dryer.
Clean with a damp cloth, taking care to
prevent water entering the appliance main
body and battery.
Clean the dustbin and mesh lter with a damp
cloth. Air dry completely before reinstalling.
①
②
③
④
5
1 2
3 4
Maintenance
Dustbin and Filters (mesh lter, pre-lter and HEPA lter)

Tineco PURE ONE S11 Series Specifications

General

Model	PURE ONE S11 Series
Type	Cordless Stick Vacuum Cleaner
Battery Life	Up to 40 minutes
Battery Voltage	21.6V
Charge Time	3-4 hours
Dustbin Capacity	0.6 liters
Suction Power	130W
Filtration	HEPA
Smart Display	Yes
Multi-Surface Cleaning	Yes
Smart Features	iLoop Smart Sensor Technology
Accessories	Crevice Tool, Dusting Brush
Filtration System	4-stage fully sealed