EasyManuals Logo

Tineco PURE ONE S11 Series User Manual

Tineco PURE ONE S11 Series
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
EN
16
When in AUTO mode, the runtime is approximately 40 minutes. When MAX power is used, the
runtime is approximately 10 minutes.
Estimated runtime data was obtained by a Tineco Laboratory using one battery and non-motorized
accessories.
A full charge takes approximately 3-4 hours for one battery.
Estimated data was obtained by a Tineco Laboratory using ambient temperatures between
39.2°F (4°C) to 104°F (40°C).
When in Use
Battery Indicator
Three solid blue lights: full power.
Two solid blue lights: medium power.
One solid blue light: low power.
One solid red light: out of power.
One blinking red light: fault, check the troubleshooting guide.
Main Body Indicator
Illuminated: working on MAX mode.
Blinking: motor failure.
Indicators on Display
Blinking: brush roller has a blockage.
Blinking: appliance has a blockage, either in the lter or the dustbin.
Runtime
Charging Time
Indicator

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tineco PURE ONE S11 Series and is the answer not in the manual?

Tineco PURE ONE S11 Series Specifications

General IconGeneral
ModelPURE ONE S11 Series
TypeCordless Stick Vacuum Cleaner
Battery LifeUp to 40 minutes
Battery Voltage21.6V
Charge Time3-4 hours
Dustbin Capacity0.6 liters
Suction Power130W
FiltrationHEPA
Smart DisplayYes
Multi-Surface CleaningYes
Smart FeaturesiLoop Smart Sensor Technology
AccessoriesCrevice Tool, Dusting Brush
Filtration System4-stage fully sealed

Related product manuals