Tineco Pure One S12 User Manual

Product Operation
Start to Work
Note:
· Before the first use, please charge the appliance (see“Charging the battery”) for
3-4 hours in an area where the temperature is higher than 39.2°F (4℃) but lower than 104°F
(40℃), and the above charging time based on the condition that the battery is cooled.
· Select the accessories according to needs (see "Accessory Instructions").
Press the switch button, the appliance
will start to work.
Pull the switch lock for continuous power
mode.
Digital display screen
AUTO mode
Power control slider
Power up
The appliance is activated in AUTO mode
by default, swipe the power control slider
to switch to Manual mode. Press the AUTO
button for 2s to switch back.
10

Tineco Pure One S12 Specifications

General

Noise level	71 dB
Cleaning type	Dry
Power control	Auto
Cleaning surfaces	Hard floor
Vacuum air filtering	HEPA
Suitable for all types of surface	Yes
Vacuum wand assembly	-
Product color	Black
Dust container type	Bagless
Power source	Battery
Charging time	- h
Battery voltage	- V

Weight and Dimensions

Depth	150 mm
Width	250 mm
Height	1200 mm
Weight	2880 g