Tineco Pure One S12 User Manual

Daily Maintenance
In order to maintain appliance performance, it is recommended that you clean the
components periodically.
Note:
· Clean the dustbin and filters every time after use.
· The HEPA and pre-filter are consumable. Replace them with new ones when the suction
performance cannot get back to normal after cleaning.
Dustbin and Filters (mesh filter, pre-filter and HEPA filter)
①
Press the dustbin release button, pull out
the dustbin.
③
Twist anti-clockwise and remove the filters.
②
Clean with wet cloth. Do not allow water to
enter the appliance, especially not into motor
and battery.
④
Clean the dustbin and mesh filter with wet
cloth. The two parts should be air dried
completely before reinstalling.
Warning:
· Do not wash the dustbin as there is a dust sensor inserted.
Please make it completely dry with a hair dryer if it meets water.
19

Tineco Pure One S12 Specifications

General

Noise level	71 dB
Cleaning type	Dry
Power control	Auto
Cleaning surfaces	Hard floor
Vacuum air filtering	HEPA
Suitable for all types of surface	Yes
Vacuum wand assembly	-
Product color	Black
Dust container type	Bagless
Power source	Battery
Charging time	- h
Battery voltage	- V

Weight and Dimensions

Depth	150 mm
Width	250 mm
Height	1200 mm
Weight	2880 g