Tineco Pure One S12 User Manual

Product Operation
Cleaning Mode Selection
AUTO mode
· In AUTO mode, the power indicator and the color of dust monitoring loop change along with
the dust amount. The color change from red to blue as the place getting cleaner. You can get
the best cleaning solution automatically.
Light up
Clean: On Min
Power
Vary by dust
amount
Heavy Dirty: On
Max Power
Note: Please do not use sharp objects to scratch or scrape the digital
display screen.
2 ways to enter AUTO mode:
①
The default setting is AUTO mode after
starting up, 3s to check blockage and
then detect the amount of dust. If no
dust detected, the power is reduced
to cruise power.
12
②
Or in the Manual mode, press AUTO for 2s,
AUTO indicator lights up and enters the AUTO
mode.

Tineco Pure One S12 Specifications

General

Noise level	71 dB
Cleaning type	Dry
Power control	Auto
Cleaning surfaces	Hard floor
Vacuum air filtering	HEPA
Suitable for all types of surface	Yes
Vacuum wand assembly	-
Product color	Black
Dust container type	Bagless
Power source	Battery
Charging time	- h
Battery voltage	- V

Weight and Dimensions

Depth	150 mm
Width	250 mm
Height	1200 mm
Weight	2880 g