Tineco Pure One S12 User Manual

Product Operation
Working Time
· Working time last about 50 mins. on AUTO mode, about 10.5 mins. on MAX power.
· Data is obtained by Tineco laboratory using one battery and non-motorized accessories.
Charging Time
· A full charge takes about 3-4 hours.
· Based on results from Tineco lab tests. Lab test environment: temperature between 39.2°F
(4℃) to 104°F(40℃).
Indicator Light
· If you see the fault lights, please check Troubleshooting.
On Work
Battery level > 20%: Solid green light.
Battery level ≤ 20%: Solid red light.
Blinking red light: Fault.
Indicator blinking: The brush roller is blocked, please remove
blockages.
Indicator blinking: The appliance is blocked, full of dust in filter
or dustbin.
Indicator blinking: The sensor inside the dustbin is blocked or
the dustbin is not installed properly.
Power indicator blinking: Motor failure.
17

Tineco Pure One S12 Specifications

General

Noise level	71 dB
Cleaning type	Dry
Power control	Auto
Cleaning surfaces	Hard floor
Vacuum air filtering	HEPA
Suitable for all types of surface	Yes
Vacuum wand assembly	-
Product color	Black
Dust container type	Bagless
Power source	Battery
Charging time	- h
Battery voltage	- V

Weight and Dimensions

Depth	150 mm
Width	250 mm
Height	1200 mm
Weight	2880 g