Tinius Olsen H10KL - User Manual

  
Unit 6 Perrywood Business Park, Honeycrock Lane, Salfords, Surrey, RH1 5DZ, England, UK
Telephone: +44 1737 765001 Facsimile: +44 1737 764768 Website: www.tiniusolsen.com
L-Series Tensile Test Machines
Instructions For Use
Issue 01

Summary

Technical Specifications

Load Frame Specifications

Machine Installation and Setup

Mains Supply Connection

Instructions for correctly connecting the machine to the mains power supply.

Warning Symbols and Safety Precautions

Connecting the Power Transformer

Fitting the Load Cell

Step-by-step instructions for mounting load cells on single and twin screw machines.

PC Connectivity Setup

Procedures for connecting the testing machine to a personal computer via RS-232.

Power ON Procedures and Safety Checks

Emergency Stop Switch Verification

How to check the functionality and position of the emergency stop switch.

Power ON;OFF Switch Operation

Mechanical Limit Switch Adjustment

Alarm Indicators

Details common alarm indicators and their meanings on the control panel.

Load Limit Alarm

Emergency Stop Alarm

Motor Drive Alarm

Tooling and Grip Installation

Tooling Attachment Method

Step-by-step guide for securely attaching tooling to the load cell and crosshead.

Tooling Alignment Procedure

Critical steps for aligning tooling to ensure accurate test measurements.

Operator Safety Guidelines

Protective Screen Usage

Recommendations on when and how to use protective screens based on test type.

Operator Training Requirements

Information on essential training for safe and effective machine operation.

Routine Maintenance and Calibration

Load Cell Calibration

Tinius Olsen H10KL Specifications

General

Brand	Tinius Olsen
Model	H10KL
Category	Test Equipment
Language	English