Need help?Do you have a question about the Tinius Olsen H50KL and is the answer not in the manual?
Information on the load cell construction, standards compliance, and accuracy.
Details the precision optical encoder for extension measurement and resolution.
Explains speed control features, programmable speeds, and motor controller.
Details the external power transformer, input/output voltage, and fuses.
Instructions for connecting the machine to the mains power supply.
Step-by-step instructions for mounting the load cell onto the machine.
Guides on connecting the testing machine to a PC via the RS-232 serial port.
Step-by-step guide for installing tooling attachments to the load cell and crosshead.
Procedures for ensuring correct alignment of tooling for accurate tests.
Details on load cell calibration and recommended service intervals.
General| Maximum Capacity | 50 kN |
|---|---|
| Data Acquisition Rate | Up to 1 kHz |
| Power Requirements | 230V, 50/60 Hz, 1ph |
| Load Resolution | 1/500, 000 |
| Dimensions | 2000 mm |
To Next Page
