Need help?Do you have a question about the Tinius Olsen H5KL and is the answer not in the manual?
Details capacity, style, construction, and travel/stiffness of the load frame.
Lists components like keys, LEDs, ports, and timers on the control panel.
Describes the load cell construction, standards, range, accuracy, and available capacities.
Details the precision optical encoder for extension measurement, including range and resolution.
Covers default speeds, jog speed, programmable steps, accuracy, and motor controller details.
Provides specific velocity ranges for different machine models (H1KL, H5KL, etc.).
Describes the external power transformer, input/output voltages, and fuse details.
Lists the power supply requirements (voltage, frequency, VA) for each model.
Instructions for unpacking the H1KL and H5KL models from their cardboard case.
Instructions for unpacking higher capacity models from wooden cases.
Detailed steps for removing the machine from the case using a forklift or hoist.
Guidance on selecting a sturdy, level location for the machine, considering weight and space.
Instructions for connecting the power transformer to the mains supply, emphasizing earthing and accessibility.
Illustrates the connection process between the power transformer and the machine using a 4-pin connector.
Instructions for mounting the load cell to the machine's crosshead.
Specific steps for fitting load cells on H1KL and H5KL single screw machines.
Procedures for fitting load cells to H10KL, H25KL, H50KL twin screw machines.
Instructions for connecting the machine to a PC using the RS-232 serial cable.
Details the location and operation of the emergency stop switch for different models.
Describes the power switch and initial status indicators upon powering up.
Explains the purpose, location, and adjustment of mechanical crosshead limit switches.
Details the function of the crosshead control keys (Up, Down, Stop, Test) and LEDs.
General| Maximum Load/Capacity | 5 kN |
|---|---|
| Testing/Crosshead Speed Range | 0.001 to 1000 mm/min |
| Load Cell Accuracy | ±0.5% of reading down to 1/1000th of load cell capacity |
| Load Resolution | 1/500, 000 of capacity |
| Power Supply | 50/60 Hz |
To Next Page
