17
emax-usa.com
PID profile 1 is tuned and optimized for Tinyhawk II Freestyle with the provided 2x
Emax 1s HV 450 mAh battery for ultimate control in outdoor flight.
Please do not change these values.
Rate Profiles:
Profile 1 is designed for optimal outdoor flight for people who like to fly "thumber"
style.
Profile 2 is a more sensitive rate profile tuned for people who like to fly “pincher”
style. These profiles can easily be switched in Betaflight OSD menu.
Adjusting Software Settings (Betaflight Configurator)
Betaflight Configurator can be used to changed programmed settings on Tinyhawk II
Freestyle. Betaflight Configurator and flight controller firmware can be downloaded at
https://github.com/betaflight/. The hardware target for Tinyhawk II Freestyle Flight
Controller is MatekF411RX.
DISCLAIMER: We do not suggest changing any PID settings on Tinyhawk II
Freestyle or upgrading the firmware to new versions. Tinyhawk II Freestyle comes
stock with an optimal tune for superior flight performance. Changing this can affect
flight time, overall speed, control of the aircraft, and excessive heat within the motors.
Reprogramming Tinyhawk II Freestyle Flight Controller
1. Put the Flight Controller in DFU mode by pressing the BOOT button while
plugging in the micro USB cable to a computer.
2. Select MATEKF411RX as the target and then select the firmware or Select
Manual Baud Rate with 256000 in the drop down menu
1. Select Load Firmware(Online) to download the firmware or Load
Firmware (Local) if already downloaded the hex file.
2. Select Flash Firmware to program the flight controller
To Next Page
Loading...
General