60
PC connection / TipKom
Further information
On the disk, you will find a comprehensive software documentation giving you information on the
handling and the functionality. Just start the help function in the Tipkom software.
System requirements:
m 486/DX 66 or higher
m VGA monitor
m Sound card (optional)
m 4 MB RAM
m Mouse
m Windows® 3.1x, Windows® 95 or higher
Windows is a registered trademark of the Microsoft Corporation.
Dialling via AT commands
Configuration of the PC interface: 9600, 8, N 1 without data flow control
Command:
m ATD telephone number <CR> Establish connection
m ATH <CR> Disconnect connection
m ATA <CR> Answer incoming call
To Next Page
Loading...
