Appendix
63
en
Device answers calls but does not record OGM 2 (OGM only) is activated. Activate OGM 1
Buzzing or other interference on loudspeaker Interference from cordless telephones,
monitors etc.
Change installation location.
No answer, subsequent telephone does not
work
Wrong connection cable, wiring boxes
incorrectly wired.
Only use original cables, check wiring boxes
(if nec. get a specialist to check).
If all of the above suggestions do not resolve your problem, use a straightened paper clip to press RESET on the back of
the tiptel 205 Plus. Insert the paper clip inclined until You reach the button within the housing. Thus, you reset the
answering machine.
To Next Page
Loading...
