www.tissot.ch
154_EN
10/21
T-TOUCH SOLAR E84
SLEEP (STANDBY MODE) > SETTING
Standby mode is a battery saving mode. All the functions are deactivated, with only the time & date counters updated.
This mode economises the battery when the watch is not being worn.
IMPORTANT: Calibrate the altitude or relative pressure by exiting standby mode, in order to obtain the correct altimetric
and barometric values.
Back to time & date modea) The watch is in standby
Switch to standby mode after
5 seconds
Beep every second
Back to time & date mode
b)
/ : stop the count, the watch
does not switch to standby mode.
or
or
or
Activate standby mode
METEO (WEATHER) > READING
Activate glass
Relative pressure display in hPa
: up 1 hectopascal
: down 1 hectopascal
Validate setting
Setting this pressure changes the altitude displayed. The possible relative pressure is deliberately limited between 950 hPa and 1100 hPa.
Setting mode
Absolute pressure display in hPa
METEO (WEATHER) > RELATIVE PRESSURE PRESETTING
1 sec.
2 sec.
or
or
In meteo mode, the hands are superimposed to indicate the weather trend.
To Next Page
Loading...
