Tissot T-TOUCH SOLAR E84 - Times T1 and T2 Setting; Bat (Battery) - Reading the Charge Level

www.tissot.ch
154_EN
5/21
T-TOUCH SOLAR E84
LONDON
NEW-YORK
T1 T2
TIMES T1 & T2 > SETTING
Pressing and holding or will move the hands forward or backward. Time T2 is set in steps of 15 minutes.
Activate glass
Time T1 or T2 display
(example: T1)
Switch to hour setting
mode
: forward 1 hour
: back 1 hour (hands and
display)
: forward 1 minute
: back 1 minute (hands and
display)
Validate the hour setting
and switch to minute
setting mode.
Validate the minute setting
and switch to seconds
synchronisation
mode (T1).
Seconds synchronisation (T1).
1 sec.
2 sec.
a) b)
or or
or
or
or
a) If the seconds are between 0 and 30
when the push-button is pressed, the
minute is unchanged and the seconds
restart at zero.
If the seconds are between 31 and 59
when the push-button is pressed, the
minute is moved forward and the seconds
restart at zero.
b) The seconds continue.
BAT (BATTERY) > READING THE CHARGE LEVEL
If the watch is in this mode, the charge state is indicated by the battery symbol.
In this state, the watch can no longer
operate correctly.
All the functions are deactivated,
except for time T1 and the date.
The watch will enter energy saving
mode (see page 9).
The watch will need to be exposed to
light to obtain sufficient charge to run
normally.
Battery charge level
display
Normal operation
Battery at
1/3 charge
Battery
charged
Battery at
2/3 charge
Battery drained Battery flat
The watch is stopped.
It automatically exits this state after
prolonged exposure to light.
The time and date must be reconfigured
upon exiting this state.
The light and compass can no longer be
activated.
"bAt" is displayed in alternation with the
regular function.
The watch will need to be exposed to light
to exit this mode.
Recharge indicator