www.tissot.ch
154_EN
13/21
T-TOUCH SOLAR E84
LAP CHRONO (LAP TIME) > READING
The Lap time function is a chronograph dedicated to measuring the lap time for 1 runner / racer, etc.
IMPORTANT: The stored data (lap times, see page 13 or split times, see page 14) is erased when you start a chrono from zero. Only LAP or SPLIT 13 or split times, see page 14) is erased when you start a chrono from zero. Only LAP or SPLIT or split times, see page 14) is erased when you start a chrono from zero. Only LAP or SPLIT 14) is erased when you start a chrono from zero. Only LAP or SPLIT ) is erased when you start a chrono from zero. Only LAP or SPLIT
chrono times are memorised. To be able to select the LAP chrono function, the SPLIT chrono needs to be reset.
Activate glass
Lap time display Reset lap time chrono
The lap times are stored
until the chronograph is
restarted
Stop lap time chrono
at last lap
Note 1: After 1 h,
the hour indicator
is displayed
(see page 13) 13) )
Note 2: After 24 h, the
hundredths disappear,
and the days,
hours, minutes and
seconds are displayed
(see page 13)13))
Stop lap time at
intermediate lap
The recorded lap time
flashes for 10 seconds,
with the next lap time
already running in the
background
Start lap time chrono
First lap time running
1 sec.
1 sec.
1 sec.
1 sec.
1 sec.
LAP CHRONO (LAP TIME) > READING STORED DATA
All times measured by the lap time chronograph function are stored, and can be displayed on the watch with the statistics for the total race time,
and the fastest, slowest and average lap times. Maximum timing limit: 99 d 23 h 59 min 59 sec.
1 sec. 1 sec.
1 sec.
Activate glass
Stored lap time display
Use the push-buttons
to browse through
the statistics
Use the push-buttons
to browse through the
lap times
TOT: total race time
AVG: average lap time
FAS: fastest lap time
SLO: slowest lap time
Statistics display
Activate data readout
or
or
Note 1: After 1 h, the hour
indicator is displayed
Example:
1 h 31 min 24 s 18 hundredths
Note 2: After 24 h, the hun-
dredths disappear, and the days,
hours, minutes and seconds are
displayed
Example:
1 day 4 h 24 min 19 s
Exit stored data reading mode
at any time
Back to lap time chrono
To Next Page
Loading...
