FM48/FM60/FM72 Finish Mower Instructions
SAFETY INSTRUCTIONS
Do not attempt to operate the mower until you have read the operator’s manual and all
the safety signs on the mower.
NOTE: The words Danger, Warning or Caution on the safety signs indicate a hazard or unsafe practice,
which could result in injury or death if proper precautions are not taken.
Do not attempt any unauthorized modifications to the mower as this could affect the function or the safety of
the mower.
OPERATING SAFETY
1. Keep all safety signs clean and legible at all times. Replace damaged or missing safety signs.
2. Ensure all shields are in place and in good condition before operating.
3. Ensure everyone is clear of the area before operating.
4. Never start or operate the mower except from the operator’s station on the power unit.
5. Do not permit riders.
6. Stop engine, set brake, remove key and wait for all moving parts to stop before servicing, adjusting,
repairing and unplugging.
7. Never operate over 540 rpm PTO speed.
8. Inspect and clean the cutting area before cutting.
9. Never operate the mower in the raised position.
10. Do not wear loose fitting clothing during operation.
11. Keep hands, feet, clothing and hair away from moving parts.
12. Keep all bystanders away from the unit when it is operating.
13. Check to see that all controls are in neutral before starting the tractor.
TRANSPORT SAFETY
1. Do not transport on a public road without a slow-moving vehicle sign and flashers on the tractor.
2. Never have the mower in operation during transport.
3. Travel speed with a raised mower should be slow enough to maintain stability of the tractor.
SERVICE AND MAINTENANCE SAFETY
1. Stop engine, set brake, remove key and wait for all moving parts to stop before servicing, adjusting,
repairing or unplugging.
2. Block up before working beneath unit.
3. Replace all shields removed during servicing before operating.
4. Use heavy leather gloves to handle sharp blades.
The safety signs used on the mower must be in well condition and be read clearly.
To Next Page
Loading...
