Titan IMPACT 440 User Manual

0814 • © Titan Tool Inc. All Rights Reserved. Form No. 805-903Q
NOTE: This manual contains important
warnings and instructions. Please read
and retain for reference.
Owner’s Manual
Notice d’utilisation
Manual del Propietario
Do not use this equipment before
reading this manual!
Register your product online at:
www.titantool.com
Serial Number* _ _ _ _ _ _ _ _ _ _
* See page 46 for location
IMPACT 440
Airless Sprayer
Model
805-015
Model
805-019
Model
805-016

Titan IMPACT 440 Specifications

General

Max Operating Pressure	3300 PSI
Hose Length	50 ft
Type	Airless
Power Source	Electric
Voltage	120V
Max Tip Size	0.023 inches

Summary

Important Safety Information

Specifications

General Description

Operation

Setup

Procedure for setting up the sprayer before plugging it in.

Preparing a New Sprayer

Instructions for flushing test fluid from a new sprayer.

Painting

Control Panel Indicators

Pressure Relief Procedure

Spraying Technique

Practice

Cleanup

Maintenance

General Repair and Service Notes

Tools and general advice for performing sprayer repairs.

Replacing the Motor

Replacing the Gears

Replacing the Transducer

Replacing the PRIME/SPRAY Valve

Servicing the Fluid Section

Repacking the Fluid Section

Replacing the Filters

Troubleshooting

Parts List

Suction Set Assembly

List of parts for the suction set assembly.

Skid Assembly

List of parts for the skid assembly.

Drive Assembly

List of parts for the drive assembly.

Fluid Section Assembly

List of parts for the fluid section assembly.

Low rider Assembly

List of parts for the low rider assembly.

Cart Assembly

List of parts for the cart assembly.

Labels

List of labels for the sprayer unit.

Product Registration

Electrical Schematic

Accessories

Warranty