For safe operation
-----------------------------------------------------------------------------------------------------------------------------------------
4. If the unit start to shake or vibrate, turn off
the engine and check the whole unit. Do not use
it until the trouble has been properly corrected.
5. Keep all parts of your body away from rotating
cutting attachment and hot surfaces.
6. Never touch the muffler, spark plug, or other
metallic parts of the engine while the engine is in
operation or immediately after shutting down
the engine. Doing so could result in serious
burns or electrical shock.
• IF SOMEONE COMES
1. Guard against hazardous situations at all times.
Warn adults to keep pets and children away from
the area. Be careful if you are approached. Injury
may result from flying debris.
2. If someone calls out or otherwise interrupts
you while working, always be sure to turn off the
engine before turning around.
■ MAINTENANCE
1. In order to maintain your product in proper
working order, perform the maintenance and
checking operations described in the manual at
regular intervals.
2. Always be sure to turn off the engine before
performing any maintenance or checking
procedures.
WARNING
The metallic parts reach high temperatures
immediately after stopping the engine.
3. Under no circumstances should you ever take
apart the product or alter it in any way. Doing so
might result in the product becoming damaged
during operation or the product becoming
unable to operate properly.
To Next Page
Loading...
Need help?
General
