Titan TTB545SSW - User Manual

Questions and Answers

A
Andrew WebbAug 2, 2025
What to do if Titan TTB545SSW Saw blades are breaking?
- J
  James AndersonAug 2, 2025
  If your Titan Saw blades are breaking, several factors could be at play. It might be due to incorrect blade tension, which can be solved by adjusting the blade tension. Another cause could be an overworked or worn-out blade, in which case you should reduce the feed rate or replace the blade. Ensure you're using the correct blade type for the material thickness—narrow blades for thin wood and wider blades for thicker wood. Lastly, avoid applying side pressure on the blade, as twisting it in the wood can also lead to breakage.
M
monroevalerieAug 9, 2025
What to do if Titan TTB545SSW Saw motor will not run?
- D
  duartebarbaraAug 9, 2025
  If your Titan Saw motor isn't running, the issue might be with the power supply. Unplug the saw and inspect the cord, plug, and outlet for any defects; replace any defective parts. If the problem persists, the motor itself might be defective.
L
Lori RobinsonAug 17, 2025
How to fix blade runout on a Titan TTB545SSW?
- S
  Stephanie HenryAug 17, 2025
  Blade runout on your Titan Saw can be caused by insufficient blade tension, so try increasing the blade tension. Another potential cause is a dull blade, which requires excessive force on the workpiece. In this case, renew the blade and ensure it is correctly tensioned.
M
Monica AndersonAug 25, 2025
Why Titan TTB545SSW Saw has excessive vibration?
- A
  angela61Aug 25, 2025
  Excessive vibration in your Titan Saw can stem from several issues. Check if the saw is properly mounted according to the instructions. An unsuitable mounting surface, like a plywood workbench, may also be the culprit; replacing it with a solid lumber surface might help. Ensure the table is not loose by tightening the table adjuster knob. Finally, verify that the motor mount is secure by tightening the motor mount screws.

Summary

Product Guarantee Information

Getting Started Guide

Product Components Overview

Identifies and lists all parts of the scroll saw with their corresponding numbers.

Technical and Legal Specifications

Details technical specifications, safety standards, and legal information for the product.

Before You Start Procedures

Covers unpacking, required tools, mounting, and initial adjustments before operation.

Detailed Product Information

Product Functions and Operation

Explains how to use the scroll saw for various cutting operations and its features.

Care and Maintenance Guide

Provides instructions for cleaning, lubrication, and general upkeep of the scroll saw.

Troubleshooting Common Problems

Lists common issues, their possible causes, and recommended solutions for the scroll saw.

Recycling and Disposal Instructions

Guidance on environmentally responsible disposal of the product and its components.

Declaration of Conformity

Official statement confirming the product meets relevant EU directives and standards.

Titan TTB545SSW Specifications

General

Model No	TTB545SSW
Type	Table Saw
Power	1500 W
Blade Diameter	254 mm
Weight	22 kg
No Load Speed	4500 rpm
No-Load Speed	4500 rpm
Bore Size	30 mm
Bevel Capacity	45°
Cable Length	2 m
Motor Power	1500 W