Need help?Do you have a question about the Titan TTB763TAS and is the answer not in the manual?
General| Power Source | Electric |
|---|---|
| Product Type | Circular Saw |
| Blade Diameter | 250 mm |
| Power | 1500 W |
| No-load speed | 5500 rpm |
Precautions related to electrical connections and avoiding shocks.
Advice on staying alert, using PPE, preventing unintentional starts, and dressing appropriately.
Emphasizes the importance and correct use of guards for safe operation.
Provides critical safety guidelines for performing various sawing operations.
Explains kickback phenomena and how to prevent it.
Specific safety rules for operating table saws, including blade and accessory handling.
Defines the purpose and scope of the table saw's application.
Lists essential checks for safe operation before connecting power.
Specifies voltage requirements and connection procedures.
A checklist of safety and functional checks before each use.
Detailed steps for performing rip cuts safely and effectively.
Detailed steps for performing cross cuts safely and effectively.
Instructions for adjusting the 90-degree stop for accurate bevel cuts.
Instructions for adjusting the 45-degree stop for accurate bevel cuts.
Detailed steps for safely removing and installing a new saw blade.
Addresses common problems like motor not running or poor cuts and their solutions.
Solutions for excess vibration and a stiff bevel adjusting handwheel.
Solutions for workpiece touching blade, jumping out, and inaccurate 90/45 degree cuts.
To Next Page
