Titan TTB960STP - Page 9

EN
TTB960STP by TITAN
Getting started...
09
Safety information
g) Use suitable detectors to determine if there are
hidden supply lines or contact the local utility
company for assistance. Contact with electric cables
can cause re and electric shock. Damaging gas lines
can lead to explosion. Breaking water pipes causes
property damage.
h) Switch the product off when loading and unloading
fasteners, making adjustments or changing
accessories. The tool may be accidentally activated
if it is connected to the power source, which may result
in personal injury.
i) Be careful when handling fasteners, especially
when loading and unloading. The fasteners have
sharp points which may result in personal injury.
j) Keep ngers away from the trigger when not
operating the tool and when moving from one
operating position to another. Unexpected triggering
will discharge a fastener, which may result in personal
injury.
k) Hold the tool by insulated gripping surfaces, when
performing an operation where the fastener may
contact hidden wiring. A fastener contacting a “live”
wire may make exposed metal parts of the tool “live”
and could give the operator an electric shock.
l) Hold the tool with a rm grasp during operation.
Uncontrolled recoil of the tool may result in unintended
activation, which may result in personal injury.
m) Keep all body parts such as hands and legs, etc.
away from the ring direction of the tool. The
fastener may penetrate the workpiece as well as any
object behind it, which may result in personal injury.
MNL_3.6 V Cordless 12mm Stapler_V2_230628.indd 9 6/28/23 5:43 PM