Titan TT5MTP26-2 User Manual

26 cm
3
5 in 1
Multi Tool
Original Instructions – TT5MTP26-2__V10522
WARNING: Read the instruction handbook thoroughly before
using the machine. First time operators should receive
practical use instructions of the machine and protective
equipment from an experienced operator.
TT5MTP26-2
EAN: 5059340256061
BX220IM/B3

Titan TT5MTP26-2 Specifications

General

Model	TT5MTP26-2
Chuck Size	13 mm
Voltage	18 V
Battery Type	Li-Ion
Max Torque	50Nm
Weight	1.8kg
Power Source	Battery

Summary

Safety Information

Safety Warnings

General warnings and important notes regarding machine operation and safety.

Preparation for Use

Actions to take before operating the machine, including reading instructions.

Safety Information (Continued)

Personal Protective Equipment (PPE)

Required safety clothing and gear for operating the machine.

General Operation Safety

Safety rules and precautions to follow during machine operation.

Safety Information (Continued)

Handling and Environmental Safety

Safe operating conditions, fuel warnings, and environmental considerations.

Brush Cutter & Grass Trimmer Safety

Specific warnings and safety advice for brush cutter and grass trimmer use.

Safety Information (Continued)

Pole Pruner & Hedge Trimmer Safety

Safety guidelines specific to the pole pruner and hedge trimmer attachments.

Maintenance Safety Precautions

Safety steps and considerations during maintenance activities.

Safety Information (Continued)

Fuel Handling Safety

Safe practices and precautions for handling fuel and refueling.

Safety Information (Continued)

Transport and Storage Guidelines

Proper methods for moving and storing the machine safely.

Vibration and Noise Reduction Tips

Methods to minimize exposure to vibration and noise.

Safety Information (Continued)

Emergency Procedures and Residual Risks

Actions for emergencies and inherent dangers of the machine.

Safety Information (Continued)

Symbols and Signal Word Explanations

Understanding manual symbols, abbreviations, and signal words.

Technical Specifications

Product Identification

Details about the tool's designation, brand, and model.

Technical Specifications (Continued)

Engine Specifications

Key details regarding the engine type, displacement, and power.

Brush Cutter Specifications

Key technical details for the brush cutter attachment.

Grass Trimmer Specifications

Key technical details for the grass trimmer attachment.

Technical Specifications (Continued)

Hedge Trimmer & Pole Pruner Specifications

Key technical details for hedge trimmer and pole pruner attachments.

Sound Level Measurements

Measured and guaranteed sound power levels.

Technical Specifications (Continued)

Vibration Level Measurements

Declared vibration values for different machine parts.

Your 5-in-1 Multi Tool

Main Unit Components

Identification of the parts of the main power unit.

Your 5-in-1 Multi Tool (Continued)

Hedge Trimmer Attachment Components

Identification of the parts specific to the hedge trimmer attachment.

Pole Pruner Attachment Components

Identification of the parts specific to the pole pruner attachment.

Your 5-in-1 Multi Tool (Continued)

Brush Cutter/Grass Trimmer Attachment Components

Identification of parts for brush cutter and grass trimmer.

Your 5-in-1 Multi Tool (Continued)

Extension Attachment and Accessories

Components for the extension attachment and identification of accessories.

Before You Start

Unpacking and Item Check

Steps for unpacking the machine and verifying all parts are present and undamaged.

Required Tools and Supplies

List of necessary tools, supplies, and PPE for operation.

Before You Start (Continued)

General Assembly Notes

Important points and safety notes before starting assembly.

Assembling Front Handle and Barrier Bar

Step-by-step guide for assembling the front handle and barrier bar.

Before You Start (Continued)

Assembling the Pole Pruner Attachment

Detailed steps for correctly assembling the pole pruner attachment.

Before You Start (Continued)

Assembling the String Trimmer Head

Detailed steps for correctly assembling the string trimmer head.

Before You Start (Continued)

Assembling the Cutting Blade

Detailed steps for attaching the tri-arc cutting blade.

Before You Start (Continued)

Connecting Attachments to Drive Shaft

How to join the drive shaft tubes and attach accessories.

Before You Start (Continued)

Fuel Mixing and Filling

Instructions for mixing fuel and oil and filling the tank.

Before You Start (Continued)

Identifying Operating Controls

Visual guide to locate and understand the machine's controls.

Quick Start

Preparation and Cold Engine Start

Initial preparation steps and procedure for starting a cold engine.

Quick Start (Continued)

Warm Engine Start, Stopping, and Storage

Steps for starting a warm engine, stopping, and preparing for storage.

Machine Functions

Intended Use and Limitations

Proper applications and restrictions for the multi-tool.

Machine Functions (Continued)

Safety Equipment and Harness Usage

Details on guards, harness fitting, and adjustment.

Machine Functions (Continued)

Barrier Bar and Throttle Lockout Features

Functionality of the barrier bar and throttle lockout.

Operation

Pre-Operation Checks

List of essential checks before starting the machine.

Starting the Engine Safety

Safety warnings and general notes for starting the engine.

Operation (Continued)

Cold Engine Start Procedure

Detailed steps for starting a cold engine.

Operation (Continued)

Warm Engine Start and Stopping Procedure

Steps for starting a warm engine and safely shutting it down.

Operation (Continued)

Trimmer Line Feeding and Cutting Tips

Line management techniques and general cutting advice.

Operation (Continued)

Grass Cutting Techniques

Proper methods and techniques for cutting grass.

Operation (Continued)

Cutting Optimization and Tree Proximity

Improving cutting efficiency and safety near trees.

Operation (Continued)

Pole Pruner Angle Adjustment

How to adjust the cutting angle of the pole pruner.

Understanding and Avoiding Kickback

Explanation of kickback dangers and how to prevent it.

Operation (Continued)

Pruning Safety and Techniques

Safe methods and techniques for pruning branches.

Operation (Continued)

Cutting Thick Branches Method

Step-by-step guide for cutting thicker branches.

Operation (Continued)

Hedge Trimmer Angle Adjustment

How to adjust the cutting angle of the hedge trimmer.

Operation (Continued)

Hedge Trimming Techniques

Efficient methods for trimming hedges.

Operation (Continued)

Post-Operation Cleaning and Storage Prep

Cleaning the machine and preparing it for storage.

Care and Maintenance

Essential Care Rules

Core maintenance principles and safety guidelines.

Cleaning Housing and Attachments

Procedures for cleaning the machine's housing and attachments.

Care and Maintenance (Continued)

Hedge Trimmer Blade Maintenance

Cleaning and sharpening the hedge trimmer's cutting device.

Pole Pruner Guide Bar Care

Maintenance procedures for the pole pruner's guide bar.

Care and Maintenance (Continued)

Guide Bar Wear Check and Rail Cleaning

Checking for guide bar wear and cleaning the rails.

Care and Maintenance (Continued)

Saw Chain Sharpening Guide

Step-by-step instructions for sharpening the saw chain.

Care and Maintenance (Continued)

Sprocket Wheel Lubrication

Procedure for lubricating the sprocket wheel.

Brush Cutter Blade Sharpening & Line Replacement

Sharpening the brush cutter blade and replacing trimmer line.

Care and Maintenance (Continued)

Air Filter and Fuel System Maintenance

Cleaning the air filter and servicing fuel lines/filter.

Care and Maintenance (Continued)

Spark Plug Maintenance and Gearbox

Spark plug checks and notes on gearbox lubrication.

Muffler Inspection

Checking and tightening muffler screws.

Care and Maintenance (Continued)

Carburetor Idle Speed Adjustment

Adjusting the engine idle speed for proper operation.

Care and Maintenance (Continued)

Regular Maintenance Schedule

Table outlining maintenance tasks and their frequencies.

Care and Maintenance (Continued)

Spare Parts and Storage

Information on acquiring spare parts and storing the machine.

Care and Maintenance (Continued)

Short and Long Term Storage

Procedures for storing the machine for short and long durations.

Care and Maintenance (Continued)

Transportation Procedures

Safe methods for transporting the machine, especially in vehicles.

Troubleshooting

Engine Starting Problems

Diagnosing and fixing issues preventing the engine from starting.

Troubleshooting (Continued)

Engine Performance Issues

Resolving issues like lack of maximum speed or poor performance.

Brush Cutter/Grass Trimmer Issues

Troubleshooting problems specific to brush cutter and grass trimmer.

Troubleshooting (Continued)

Pole Pruner Problems

Diagnosing and fixing issues related to the pole pruner attachment.

Hedge Trimmer Problems

Diagnosing and fixing issues related to the hedge trimmer attachment.

Recycling and Disposal / Guarantee

Recycling and Disposal Procedures

Proper disposal methods for the machine and waste.

Guarantee Terms and Conditions

Details about the manufacturer's guarantee and how to claim.

Customer Care and Technical Helpline

Repair Service Process

How the repair service works, including collection and return.

Contact Information for Support

Ways to get in touch for customer care and technical assistance.

Availability of Spare Parts

Obtaining Spare Parts

Information on how to find and order spare parts for the machine.

UK Declaration of Conformity

Product Identification and UK Compliance

Details about the product and its UK regulatory conformity.

Relevant UK Legislation and Standards

Lists applicable UK regulations and standards for conformity.

EU Declaration of Conformity

Product and Manufacturer Details

Identification of product, manufacturer, and authorized representative.

EU Harmonisation Legislation and Product Description

Lists applicable EU harmonisation laws and product description.

EU Declaration of Conformity (Continued)

EU Directives Compliance List

Listing of relevant EU directives the product complies with.

EU Declaration of Conformity (Continued)

Harmonised Standards and Notified Body Details

Details on harmonised standards and notified body certification.