Titan TTCSP49 - Technical Specifications; General and Engine Specs

15
TTCSP49
Getting Started . . .
Technical specications
Technical specications
General
> Dimensions: approx. 425 x 240 x 275 mm
> Product without guide bar, saw chain and
empty tank: approx. 5.54 kg
> Machine with guide bar, saw chain and empty
tank, in normal operating conguration: approx. 6.9 kg
> Fuel tank capacity: 550 ml
> Petrol type: Octane rating of at least 90,
unleaded, Maximum 10%
renewable ethanol (E10 or
below)
> Engine oil type: Top quality synthetic oil
specically for two-stroke
engines, of JASO FC minimum
specication.
> Fuel-oil ratio: 40:1
> Lubrication oil capacity: 260 ml
> Clutch engagement speed: Min. 4300 min
-1
> Cutting length: 49 cm
> Guide bar brand / model: OREGON® / 208PXBK095
> Guide bar length: 50 cm (20")
> Saw chain gauge: 1.47 mm (0.058")
> Saw chain brand / model: OREGON® / 21BPX078X
> Saw chain pitch: 8.255 mm (0.325")
> Saw chain speed n
0
: 23.1 m/s
> Drive sprocket (teeth and pitch): 7 teeth x 8.255 mm
Engine
> Engine model: 1E45F
> Engine type: air cooled, 2-stroke engine
> Engine displacement:
49.3 cm
3
> Maximum power: 2.1 kW
> Maximum operating engine speed
(rotational frequency): 12000 min
-1
> Idle speed:
3000 ±400 min
-1
> Spark plug type: CHAMPION RCJ7Y
> Spark plug gap: 0.6-0.7 mm
> Carburetor brand / model: WALBRO / WT 893A