Titan TTCSP49 - Page 55

55
TTCSP49
In more detail . . .
Idle speed screw
50
28
WARNING! Adjusting the screws L and H must be performed by an authorised
service centre or a similarly qualied person. Using a single D screwdriver
(not provided) turn the screws L and H to adjust the quantity of fuel in relation
to the air.
Mufer
If it be necessary to modify or replace the silencer, contact an authorised service centre
or a similarly qualied person. Regularly inspect and tighten the mufer xing screws.
Spare parts/Replacement parts
The following parts of this product may be replaced by the consumer. Spare parts are
available at an authorised dealer or through our customer service.
Description Model no. or Specication
Guide bar (2) OREGON® 208PXBK095
Saw chain (3) OREGON® 21BPX078X
Spark plug CHAMPION RCJ7Y
(Gap of electrodes: 0.6-0.7 mm) or other model with same
specications
Care and maintenance