EN
09
TTI821GGT by TITAN
Getting started...
Preparation
1. Before use check the supply and extension cord for
signs of damage or aging. If the cord becomes damaged
during use, disconnect the cord from the supply
immediately. DO NOT TOUCH THE CORD BEFORE
DISCONNECTING THE SUPPLY. Do not use the
machine if the cord is damaged or worn.
2. Before use, always visually inspect the machine for
damaged, missing or misplaced guards or shields.
3. Never operate the machine while people, especially
children, or pets are nearby.
Operation
1. Keep supply and extension cords away from cutting means.
2. Wear eye protection and stout shoes at all times while
operating the machine.
3. Avoid using the machine in bad weather conditions
especially when there is a risk of lightning.
4. Use the machine only in daylight or good articial light.
5. Never operate the machine with damaged guards or
shields or without guards or shields in place.
6. Switch on the motor only when the hands and feet are
away from the cutting means.
7. Always disconnect the machine from the power supply
(i.e. remove the plug from the mains, remove the
disabling device or removable battery)
1) whenever the machine is left unattended;
2) before clearing a blockage;
3) before checking, cleaning or working on the machine;
4) after striking a foreign object;
5) whenever the machine starts vibrating abnormally.
8. Take care against injury to feet and hands from the
cutting means.
Safety information
To Next Page
Loading...
Need help?
General
