EN
17
TTI821GGT by TITAN
Getting started...
You will need
(items not supplied)
Suitable personal protective equipment
Suitable crosshead screwdriver
(items supplied)
Guard (11)
Battery pack (16)
Charger (17) and its manual
NOTE: The accessories required depend on the intended application.
Ask your dealer for advice.
Setup
WARNING! The product must be fully assembled before operation!
Do not use a product that is only partly assembled or assembled with
damaged parts!
Follow the assembly instructions step-by-step and use the pictures
provided as a visual guide to easily assemble the product!
Do not connect the product to battery pack (16) before it is completely
assembled!
NOTE: Take care of small parts that are removed during assembly or
when making adjustments. Keep them secure to avoid loss.
Guard
1. Turn the trimmer head (13) upside down.
2. Untighten the screw (11a) and keep it handy.
3. Put out the plant protector (12) rstly (Fig. 1, step 1), then align and slide
the guard (11) onto the sliding slots (13f) of the trimmer head (13) (Fig. 1,
step 2). Fully insert the guard (11) and make sure that the screw holes (11c,
13i) are well aligned.
4. Secure the guard (11) with the screw (11a) in clockwise (Fig. 1, step 3).
12
11a
11c
11
13
13I
13f
11c
11
2.
1.
Fig. 1
Before you start
To Next Page
Loading...
Need help?
General
