Titanium MIG 140 - Welder Use and Care; Maintenance; Gas Shielded Welding; Cylinder Safety

Page 5@)1&/2:(+.:4=&A02'/.)+'B&6=24'2&:4==&CD###DE#$D$EC#,Item 64804 64805
FG@<HIJGKLH<LGLM< NGFKM&O<PQKLRO<PQKLR&HKSF F<HTS
O2=>21&T'2&4+>&M412
1. Q)&+)/&0'2&/(2&*2=>21&.8&/(2&'*./:(&>)2'&+)/&/01+&
./&)+&4+>&)88,&&Any welder that cannot be controlled
with the switch is dangerous and must be repaired.
2. Q.':)++2:/&/(2&6=09&81);&/(2&6)*21&
')01:2&328)12&;4\.+9&4+W&4>^0'/;2+/'B&
:(4+9.+9&4::2'')1.2'B&)1&'/)1.+9&*2=>21',&&
Such preventive safety measures reduce the
risk of starting the welder accidentally.
3. S12X2+/&0+.+/2+/.)+4=&'/41/.+9,&
<+'012&/(2&'*./:(&.'&.+&/(2&)88D
6)'./.)+&328)12&:)++2:/.+9&/)&6)*21&
')01:2&)1&;)X.+9&/(2&*2=>21, Carrying
or energizing welders that have the
switch on invites accidents.
4. F/)12&.>=2&*2=>21'&)0/&)8&/(2&124:(&)8&
:(.=>12+&4+>&>)&+)/&4==)*&621')+'&0+84;.=.41&
*./(&/(2&*2=>21&)1&/(2'2&.+'/10:/.)+'&/)&
)6214/2&/(2&*2=>21,&&Welders are dangerous
in the hands of untrained users.
5. T'2&/(2&*2=>21&4+>&4::2'')1.2'&.+&
4::)1>4+:2&*./(&/(2'2&.+'/10:/.)+'B&/4\.+9&
.+/)&4::)0+/&/(2&*)1\.+9&:)+>./.)+'&4+>&
/(2&*)1\&/)&32&6218)1;2>, Use of the welder
for operations different from those intended
could result in a hazardous situation.
6. Q)&+)/&0'2&/(2&*2=>21&8)1&6.62&/(4*.+9,
J4.+/2+4+:2
1. J4.+/4.+&*2=>21',&&M(2:\&8)1&;.'4=.9+;2+/&)1&
3.+>.+9&)8&;)X.+9&641/'B&3124\492&)8&641/'&
4+>&4+W&)/(21&:)+>./.)+&/(4/&;4W&4882:/&/(2&
*2=>21_'&)6214/.)+,&&K8&>4;492>B&(4X2&/(2&
*2=>21&1264.12>&328)12&0'2, Many accidents
are caused by poorly maintained welders.
2. ]4X2&W)01&*2=>21&'21X.:2>&3W&4&A04=.8.2>&
1264.1&621')+&0'.+9&)+=W&.>2+/.:4=&
126=4:2;2+/&641/',&&This will ensure that
the safety of the welder is maintained.
3. J4.+/4.+&=432='&4+>&+4;26=4/2'&)+&/(2&O2=>21,&&&
These carry important information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
4. T+6=09&328)12&;4.+/2+4+:2,&Unplug the Welder
from its electrical outlet before any inspection,
maintenance, or cleaning procedures.
R4'&F(.2=>2>&O2=>.+9&`&MW=.+>21&F482/W
MW=.+>21'&:4+&2[6=)>2&*(2+&>4;492>,
1. L2X21&*2=>&)+&4&612''01.Z2>&)1&4&:=)'2>&:W=.+>21,
2. L2X21&4==)*&4+&2=2:/1)>2&()=>21B&
2=2:/1)>2B&*2=>.+9&/)1:(B&)1&*2=>.+9&
*.12&/)&/)0:(&/(2&:W=.+>21,
3. Y226&:W=.+>21'&4*4W&81);&4+W&2=2:/1.:4=&:.1:0./'B&
.+:=0>.+9&*2=>.+9&:.1:0./',
4. Y226&61)/2:/.X2&:46&.+&6=4:2&)X21&/(2&X4=X2&
2[:26/&*(2+&/(2&:W=.+>21&.'&.+&0'2,
5. T'2&)+=W&:)112:/&94'&'(.2=>.+9&2A0.6;2+/&
>2'.9+2>&'62:.8.:4==W&8)1&/(2&/W62&)8&*2=>.+9&
W)0&*.==&>),&&Maintain this equipment properly.
6. S1)/2:/&94'&:W=.+>21'&81);&(24/B&32.+9&'/10:\B&
6(W'.:4=&>4;492B&'=49B&8=4;2'B&'641\'B&4+>&41:',
7. G=*4W'&0'2&61)621&61):2>012'&
/)&;)X2&:W=.+>21',
&FG-<&H]<F<&KLFHUTMHKVLF,