Titanium MIG140 - Welder Use and Care; Safe Welder Operation Practices; Maintenance; Routine Welder Maintenance

Page 5@)1&/2:(+.:4=&A02'/.)+'B&6=24'2&:4==&CD###DE#FDFEC#,Item 57863 57864
GH@<IJKHLMI<MHMN< OHGLN&P<QRLMSP<QRLMS&ILTG G<IUT
P2=>21&U'2&4+>&N412
1. R)&+)/&0'2&/(2&*2=>21&.8&/(2&'*./:(&>)2'&+)/&/01+&
./&)+&4+>&)88,&&Any welder that cannot be controlled
with the switch is dangerous and must be repaired.
2. R.':)++2:/&/(2&6=09&81);&/(2&6)*21&
')01:2&328)12&;4].+9&4+X&4>_0'/;2+/'B&
:(4+9.+9&4::2'')1.2'B&)1&'/)1.+9&*2=>21',&&
Such preventive safety measures reduce the
risk of starting the welder accidentally.
3. T12Y2+/&0+.+/2+/.)+4=&'/41/.+9,&
<+'012&/(2&'*./:(&.'&.+&/(2&)88D
6)'./.)+&328)12&:)++2:/.+9&/)&6)*21&
')01:2&)1&;)Y.+9&/(2&*2=>21, Carrying
or energizing welders that have the
switch on invites accidents.
4. G/)12&.>=2&*2=>21'&)0/&)8&/(2&124:(&)8&
:(.=>12+&4+>&>)&+)/&4==)*&621')+'&0+84;.=.41&
*./(&/(2&*2=>21&)1&/(2'2&.+'/10:/.)+'&/)&
)6214/2&/(2&*2=>21,&&Welders are dangerous
in the hands of untrained users.
5. U'2&/(2&*2=>21&4+>&4::2'')1.2'&.+&
4::)1>4+:2&*./(&/(2'2&.+'/10:/.)+'B&/4].+9&
.+/)&4::)0+/&/(2&*)1].+9&:)+>./.)+'&4+>&
/(2&*)1]&/)&32&6218)1;2>, Use of the welder
for operations different from those intended
could result in a hazardous situation.
6. R)&+)/&0'2&/(2&*2=>21&8)1&6.62&/(4*.+9,
K4.+/2+4+:2
1. K4.+/4.+&*2=>21',&&N(2:]&8)1&;.'4=.9+;2+/&)1&
3.+>.+9&)8&;)Y.+9&641/'B&3124]492&)8&641/'&
4+>&4+X&)/(21&:)+>./.)+&/(4/&;4X&4882:/&/(2&
*2=>21`'&)6214/.)+,&&L8&>4;492>B&(4Y2&/(2&
*2=>21&1264.12>&328)12&0'2, Many accidents
are caused by poorly maintained welders.
2. ^4Y2&X)01&*2=>21&'21Y.:2>&3X&4&A04=.8.2>&
1264.1&621')+&0'.+9&)+=X&.>2+/.:4=&
126=4:2;2+/&641/',&&This will ensure that
the safety of the welder is maintained.
3. K4.+/4.+&=432='&4+>&+4;26=4/2'&)+&/(2&P2=>21,&&&
These carry important information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
4. U+6=09&328)12&;4.+/2+4+:2,&Unplug the Welder
from its electrical outlet before any inspection,
maintenance, or cleaning procedures.
S4'&G(.2=>2>&P2=>.+9&a&NX=.+>21&G482/X
NX=.+>21'&:4+&2\6=)>2&*(2+&>4;492>,
1. M2Y21&*2=>&)+&4&612''01.[2>&)1&4&:=)'2>&:X=.+>21,
2. M2Y21&4==)*&4+&2=2:/1)>2&()=>21B&
2=2:/1)>2B&*2=>.+9&/)1:(B&)1&*2=>.+9&
*.12&/)&/)0:(&/(2&:X=.+>21,
3. Z226&:X=.+>21'&4*4X&81);&4+X&2=2:/1.:4=&:.1:0./'B&
.+:=0>.+9&*2=>.+9&:.1:0./',
4. Z226&61)/2:/.Y2&:46&.+&6=4:2&)Y21&/(2&Y4=Y2&
2\:26/&*(2+&/(2&:X=.+>21&.'&.+&0'2,
5. U'2&)+=X&:)112:/&94'&'(.2=>.+9&2A0.6;2+/&
>2'.9+2>&'62:.8.:4==X&8)1&/(2&/X62&)8&*2=>.+9&
X)0&*.==&>),&&Maintain this equipment properly.
6. T1)/2:/&94'&:X=.+>21'&81);&(24/B&32.+9&'/10:]B&
6(X'.:4=&>4;492B&'=49B&8=4;2'B&'641]'B&4+>&41:',
7. H=*4X'&0'2&61)621&61):2>012'&
/)&;)Y2&:X=.+>21',
&GH-<&I^<G<&LMGIVUNILWMG,