Please note:
To operate the TiVo
®
media device you will need:
1. To connect the media device to your home broadband internet
service. Depending on the setup of your home network, this
will require an Ethernet cable or the purchase of a TiVo
Wireless Adaptor. Internet Service Provider (ISP) charges are
additional.
2. To have a digital terrestrial antenna at your home, and to live
within a free-to-air digital coverage area. (Note: this media
device will not connect to pay TV services.)
3. To activate the TiVo
®
service, which is available free of charge
from www.tivo.com.au/activate
and subject to terms and
conditions.
4. To connect the media device to your television by using the
cables included in this carton or by purchasing an HDMI cable
(available separately).
5. To follow the guidelines in this manual. This will ensure
continued access to all of your TiVo features.
6. To go to www.tivo.com.au/support
for assistance if you have
any problems or questions about your TiVo unit or TiVo
service.
To Next Page
