1. Google Maps link: This is the link to the Google map showing the position of the tracker unit.When click
the link, if a map is displayed, there is GPS information for the unit. If there is no may, there is no GPS
information for the tracker.
2. V:A/V: Indicates GPS signal. V:A indicates there is a GPS signal; V:V indicates there is no GPS signal.
3. 2014-07-29 06:41:43 The date and time stamp when the unit last received a GPS signal.
4. S: 007km/h: This indicates the last known speed of the unit.
5. Bat:80% The approximate amount of battery charge remaining. The value is between5%and 100%, with
100% being fully charged.
6. 4109112546: The IMEI code of tracker device. This number is used for tracking website and the app.
3. SMS Tracking
1) Call the SIM-card phone number in the device by other cell phone
2) Receive a Google Maps link by SMS to your mobile phone
3) Click on the Google Maps link
4) Now it displays the position of device.
3.1 Command Instruction
3.2 ONLINE TRACKING
3.2.1 Turn on GPRS function by sending comand
“
gprs123456
”
to the tracker, and set the apn for tracker,
then online tracking will work .
INSTRUCTION
COMMAND REPLY
Reboot the device begin123456 begin ok
Set authorized number admin123456 phone number admin ok
Cancel authorized number noadmin123456 phone number noadmin ok
SMS Track G123456# Google link
Set GMT time zone number timezone123456 8
Timezone123456 -8
time ok
Sleep by time (default mode-save much
power,tracker will fall asleep in 5
minutes)
sleep123456 time sleep time ok
Sleep by shock sensor(
To Next Page
Loading...
