TKSTAR TK905 - Sleep by Shock Sensor Mode; Monitor (Voice Surveillance); Terminal (local) Time Setting

Message Reply：OK! Vibration xyz:3 Alarm
Mode:Call&SMS
E.g：
(Tracker only works for 5 minutes after being waked up, and back to sleep mode, GPS shut off, GSM
works in low consumption mode. SMS command, calling tracker can wake up the tracker.)
4.5 Sleep by shock sensor mode setting: (Factory setting is “Sleep by shock mode“)
Command：sleep123456 shock
Reply：sleep shock ok
E.g：
(No shock for 5 minutes, the tracker will work in “sleep by shock” mode, GPS shut off, GSM works in low
consumption. Vibration, SMS, calling can wake up the tracker.)
4.6 Monitor (Voice Surveillance),after device received the command, it will call back to the admin phone .
Command: jt
Not Reply
4.7 Terminal (local) Time Setting(factory setting GMT 0)
Command：timezone123456, local timezone
Reply：time ok
E.g： timezone123456 ,1 timezone123456, -1 Timezone123456,8