TLD GPU-406 User Manual

Creation: 01.31 - 2014 2-3-2
GPU - 406
GPU - 409
A. Engine/Generator Removal/Installation
The engine and generator must be removed as an assembly. After the assembly is removed from the
unit, the engine and generator may be separated.
1. Remove the exhaust system components.
2. Drain the coolant, unbolt the fan guard, and remove the radiator.
3. Disconnect the battery cables.
4. Disconnect the fuel lines and plug the ends.
5. Disconnect the electrical connector where the engine harness plugs into the electrical box. Tag and
disconnect any wires to frame mounted electrical components.
6. Unbolt and lift out the engine/generator assembly, leaving the front engine mount attached to the
engine.
7. The installation of the engine/generator assembly is the reverse of the removal procedure.
WARNING:
THE ENGINE/GENERATOR ASSEMBLY IS HEAVY. A LIFTING
DEVICE MUST BE USED TO REMOVE THESE COMPONENTS.
Property of American Airlines

TLD GPU-406 Specifications

General

Brand	TLD
Model	GPU-406
Category	Portable Generator
Language	English