Creation: 1.31 – 2014 2-7-17
DC Volts Scale – This setting calibrates the 28VDC output voltage that the GCM2 indicates on the
LCD. It should be calibrated against a calibrated AC Amp meter.
This setting is pre-adjusted on each specific GCM2 at factory calibration and should rarely need
adjustment
Default = +0
9. Once all the changes have been made, exit the adjustments menu by holding down the
rotary dial. The GPU is now ready for use.
The following lists all of the parameters in the order they are shown on the Adjust Menu as the knob
is rotated:
Parameters List at V2.85:
DC Line Drop
DC Amps Limit
DC Amps Scale
DC-A Offset
Hz Max Limit
Hz Min Limit
ACV Hi-Limit
ACV Lo-Limit
Delay Max Hz
Delay Min Hz
Delay Hi-ACV
Delay Lo-ACV
KVA Machine
ACV Target Cts
DCV Target Cts
ACV P-Gain
DCV P-Gain
Ena DC Output
Ena AC Output
Load Defaults
AC Line Drop
ACV Int-Gain
ACV Int-Rate
Show Metric
RTC Year
RTC Date
RTC Time
Property of American Airlines
To Next Page
Loading...
