Hardware Version : 5.02 Document Version : 0
TECHMAN ROBOT INC. 5F., No. 58-2, Huaya 2nd Rd., Guishan Dist., Taoyuan City, 333411 , Taiwan
Techman Confidential 30
Disassembly and assembly 800 Series Joint
Remove the Joint cover and Joint rubber.
Remove the Joint cable from the Joint.
Remove the screws connecting the Joint to other Joints or the Arm, then detach the Joint.
During assembly, follow the reverse steps of the previously mentioned procedure.
Disassembly and assembly 500 Series Joint
Remove the Joint cover and Joint rubber.
Remove the Joint cable from the Joint.
Remove the screws connecting the Joint to other Joints or the Arm, then detach the Joint.
During assembly, follow the reverse steps of the previously mentioned procedure.
Disassembly and assembly 200L Series Joint
Remove the Joint cover and Joint rubber.
Remove the Joint cable from the Joint.
Remove the screws connecting the Joint to other Joints or the Arm, then detach the Joint.
During assembly, follow the reverse steps of the previously mentioned procedure.
Disassembly and assembly Upper arm
Remove Joint cover and Joint rubber which in Joint 2 & Joint 3
Remove Joint cable which in Joint 2 & Joint 3
Remove the screws connecting the Upper arm to Joint 2 and Joint 3, then detach the Upper arm.
To Next Page