Chapter 5 BIOS
26 AI5TV Motherboard User’s Manual
Drive A / Drive B
These fields identify the types of floppy disk drive A or drive B that
has been installed in the computer. The available specifications for
floppy drives are:
360KB, 5.25in.1.2MB, 5.25in. 720KB, 3.5in.1.44MB, 3.5in.,
2.88MB, 3.5in.
Floppy 3 Mode Support
This is the Japanese standard floppy drive. The standard stores 1.2MB
in a 3.5in diskette. You
have four options to choose:
Disabled No 3 mode floppy drive installed.(default)
Drive A Installed 3 mode drive at drive A.
Drive B Installed 3 mode drive at drive B.
Both Installed 3 mode drive at drive A and B.
Video
This field selects the type of video display card installed in your
system. You can choose the following video display cards:
EGA/VGA For EGA, VGA, SEGA, SVGA or PGA monitor
adapters.(default)
CGA 40 Power up in 40 column mode.
CGA 80 Power up in 80 column mode.
MONO For Hercules or MDA, includes high resolution
monochrome adapters.
Halt On
This field determines whether the system will halt if an error is detected
during power up.
All errors Whenever the BIOS detects a non-fatal error the
system will be halted and you will be prompted.
No errors The system boot will not be halted for any error that
may be detected. (default)
All, But Keyboard The system boot will not be halted for a
keyboard error; it will stop for all other errors.
All, But Diskette The system boot will not be halted for a disk
error; it will stop for all other errors.
All, But Disk/Key The system boot will not be halted for a
keyboard or disk error; it will stop for all other
errors.
To Next Page
Loading...